Mila Evolution
This is a Mila Evolution lock I got from Mikey from England. It’s a pretty good design I think and very interesting as it is possible to pick or bump this lock but a nasty surprise then waits as the plug starts to turn -the trap pins.
I’ve already seen trap pins on a Kale lock before and thought it was very clever as it will eliminate most picking possibilities except imprisoning.
This Mila Evo lock contains 6 pins but the trap pins will only effects pins 2-4.
The plug is trapped in this position by the trap pins that are pushed into the pins holes which are not “full” with the pin (as they should have been with the key inside)
However it is possible at least with the lock I have to SPP the pins again so the trap pins will be pushed down again.I also managed to find another way of using 5 different blanks that are cut into different heights while using a very thin wire to push the high pins you can turn the plug.
I will need to test a plug spinner on this lock as I think it might be able to turn it very fast .
BTW re pinning this lock was a complete nightmare as I had to build (or cut) a plug for those trap pins,also it took me 2 hours to find one trap pin that jumped out of the plug -so beware 😀
Raf's lockpicking world 